This consolidation is unofficial and is for reference only.  For the official version of the regulations, consult the original documents on file with the Registry of Regulations, or refer to the Royal Gazette Part II.
Regulations are amended frequently.  Please check the list of Regulations by Act to see if there are any recent amendments to these regulations filed with the Registry that are not yet included in this consolidation.
Although every effort has been made to ensure the accuracy of this electronic version, the Registry of Regulations assumes no responsibility for any discrepancies that may have resulted from reformatting.
This electronic version is for your personal use and may not be copied for the purposes of resale in this or any other form.


Metal Fabricator (Fitter) Trade Regulations

made under Section 29 of the
Apprenticeship and Trades Qualifications Act
R.S.N.S. 2003, c. 1
O.I.C. 84-756 (June 26, 1984), N.S. Reg. 128/84
as amended by O.I.C. 96-268 (April 16, 1996), N.S. Reg. 75/96

1 (1) In these regulations:

(a) "Act" means the Apprenticeship and Trades Qualifications Act;

(b) "engaged" means employed for hire or remuneration;

(c) "General Regulations" means regulations made by the Governor in Council under the Act that apply generally to all designated trades;

(d) the "metal fabricator (fitter) trade" or "trade" means the work essentially performed by a metal fabricator in fabricating, assembling and repairing structural-metal products.

(2) Unless the context otherwise requires, words defined in the Act or General Regulations have the same meaning when used in these regulations.

2 No person shall enter into a contract of apprenticeship either as or with an apprentice in the trade unless the person being apprenticed has successfully completed grade twelve or its equivalent in the course skills required by the trade/occupation.
Section 2 replaced: O.I.C. 96-268, N.S. Reg. 75/96.

3 The term of apprenticeship for the trade is four (4) years.

4 The wage of an apprentice shall be no less than is prescribed in the following wage schedule and shall include the increases to which the apprentice is entitled on successful completion of each six month period:

during the first six months at 50% of the journeyman's rate;
during the second six months at 55% of the journeyman's rate;
during the third six months at 60% of the journeyman's rate;
during the fourth six months at 65% of the journeyman's rate;
during the fifth six months at 70% of the journeyman's rate;
during the sixth six months at 75% of the journeyman's rate;
during the seventh six months at 80% of the journeyman's rate;
during the eighth six months at 90% of the journeyman's rate.

5 A person who

(a) satisfies the requirements of Section 19 of the General Regulations; and

(b) produces evidence to prove six (6) years of practical experience engaged in the trade, or five (5) years if the applicant has successfully completed a vocational training course approved by the Director,

is eligible to be examined for a journeyman's certificate of qualification.

[Please note: the trade name has been amended to comply with the Trade Names Equivalency Regulations, O.I.C. 97-564, N.S. Reg. 113/97.]


Back to list of regulations by Act
Back to list of Acts by department
Read about consolidations  

This page and all contents are copyright © 2003, Province of Nova Scotia, all rights reserved.
Please send comments to:  regofregs@gov.ns.ca